10pcs 5mm Mercury Tilt Switch 20V 1A For Alarm Car Motion Position Angle

Description

Home
Arduino
Module
Sensor
Chips
About Us
working principle:
Because of gravity, mercury droplets will flow along the lower part of the container. If two electrodes are in contact at the same time, the switch will close the circuit and turn on the switch.
Note: Mercury is toxic to the human body and the environment, so please be careful when using the mercury switch to prevent it from breaking; it should be handled properly when it is no longer used.
Features:
The mercury switch is based on the movement of the mercury enclosed in the glass or metal casing to realize the switch. Therefore, compared with the mechanical switch, the mercury switch has many
characteristics:
①It can be used in harsh environmental conditions. Because the mercury switch is sealed, the mercury inside is isolated from the outside, so it can be used in an environment with oil, steam, dust, and corrosive gases.
②The external force required for on-off is small. Mercury is the only metal that can remain liquid at room temperature. Its surface tension and specific gravity are both large. As long as a slight external force causes the mercury switch to tilt, the mercury can move to make the switch on and off.
③ Mercury has good conductivity, and the contact resistance between mercury switch electrodes is generally less than 100mΩ.
④The allowable current of the mercury switch depends on the material of the electrode. The maximum allowable current for tungsten wire electrodes is 10A, while the maximum allowable current for general alloy wires is generally 1A.
⑤Because the on-off of the mercury switch is determined by the gravity of mercury, it can work reliably for a long time.
⑥The contact of the electrode is liquid contact, without any noise.
⑦Because mercury can flow, as long as the acceleration exceeds the set value, the mercury switch can be turned on or off, so it can be used as a vibration sensitive element.
⑧Small size, various forms, and fully sealed devices.
⑨Simple structure and low price.
The difference between mercury switch and vibration switch
1. All materials of the ball switch can meet the environmental protection requirements, but the mercury switch can not meet the requirements of its own material.
2. Due to the conduction method of the ball switch, the metal ball is energized with the trigger guide pin to generate a signal. Because the contact area between the ball and the trigger guide pin is small and the ball is movable, the conduction sometimes flashes off, and the mercury The switch is mercury in contact with the trigger terminal. Because mercury is liquid, the contact surface is large and stable. Generally speaking, the conduction effect is more stable.
3. The ball switch is a metal shell with good structural strength.
Precautions
Mercury is toxic to the human body and the environment, so please be careful when using the mercury switch to prevent it from breaking; it should be handled properly when it is no longer used.
Package Included:
Mercury switch X1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.